Главная
Форумы
Новые сообщения
Поиск сообщений
Что нового?
Новые сообщения
Новые ресурсы
Последняя активность
Ресурсы
Последние отзывы
Поиск ресурсов
Пользователи
Зарегистрированные пользователи
Текущие посетители
Вход
Регистрация
Что нового?
Поиск
Поиск
Искать только в заголовках
От:
Новые сообщения
Поиск сообщений
Меню
Вход
Регистрация
Приложение
Установить
Форумы
Спортивная стрельба
Пистолет
Steyr LP10
JavaScript отключён. Чтобы полноценно использовать наш сайт, включите JavaScript в своём браузере.
Вы используете устаревший браузер. Этот и другие сайты могут отображаться в нём некорректно.
Вам необходимо обновить браузер или попробовать использовать
другой
.
Ответить в теме
Сообщение
<blockquote data-quote="kashchei" data-source="post: 42799" data-attributes="member: 972"><p>Интересную фигню вычитал. Оказывается что у штеера скачки скорости могут зависеть даже от положения разрезной втулки винта поджима пружины ударника.</p><p>На одном англицком форуме уже кучу копий сломали по этому вопросу. Интересно что сам штеер на это скажет.</p><p>Так что в редуктор лезть рано, разве что для ТО. С ударкой надо разобраться сперва.</p><p></p><p>velocity plays a very crucial role, having very low velocity or very high velocity is sure to give you bad scores. the optimal velocity for steyr lp 10 is around 525 fps or 160mps . ( using finale match blue 7.7 gr pellets) </p><p>adjusting the velocity in steyr lp10 is very easy :</p><p></p><p>1. remove the grip with a 4 mm LN key.</p><p>2. remove the front sight if u have combro , fix the combro on the muzzle end, put a plastic rod in the barrel from the muzzle end to check that the path of the pellet travel is lying in the centre of the censor rings. adjust and fix the combro.</p><p>in case of using any box type chronograph like chrony, it is not required.</p><p>3.take 2-3 shots one by one and record the result.</p><p>4.now take a 1.5 mm LN key and a screw driver, look for a <strong>screw in the center of a C ring</strong>( it is a full ring holding a screw the ring has a cut on it when any sideways presure is applied on the ring it locks the screw) when you see from behind. <strong>in line with this C clip on the right side of the pistol there is a small hole which is infact the lock for the C ring, its a 1.5 mm LN screw</strong></p><p>5 now the real task---losen the 1.5 mm LN screw 1 1/2 turn by turning anticlockwise. now turn the screw that is in the centre of the C ring in small increments of 2 to 3 minutes in clockwise direction, and tighten the side screw and take few shots, keep repeating the steps until you gete it closer to the 525fps/160mps mark approx. </p><p></p><p></p><p>.*** note the <strong>cut on the ring should be either on top or bottom, at 12Oclock or 6Oclock position</strong>, other wise the side screw will not press the C ring and the screw wont be locked.</p><p></p><p>**** after good use of 2-3 years normally the velocity spring needs change, and if the variation from shot to shot is more than 20 fps there may be other problems like the regulator malfunction, worn out O rings, oor simply the mechanism that hits on the valve pin has become sticky, for this please look for a more qualified person.</p><p></p><p>**** a properly functioning steyr is a <strong>superb machine</strong>, happy shooting enjoy the sport</p><p></p><p><strong>mahipal s rathore</strong></p><p>INDIA</p><p>Вот как-то так.</p></blockquote><p></p>
[QUOTE="kashchei, post: 42799, member: 972"] Интересную фигню вычитал. Оказывается что у штеера скачки скорости могут зависеть даже от положения разрезной втулки винта поджима пружины ударника. На одном англицком форуме уже кучу копий сломали по этому вопросу. Интересно что сам штеер на это скажет. Так что в редуктор лезть рано, разве что для ТО. С ударкой надо разобраться сперва. velocity plays a very crucial role, having very low velocity or very high velocity is sure to give you bad scores. the optimal velocity for steyr lp 10 is around 525 fps or 160mps . ( using finale match blue 7.7 gr pellets) adjusting the velocity in steyr lp10 is very easy : 1. remove the grip with a 4 mm LN key. 2. remove the front sight if u have combro , fix the combro on the muzzle end, put a plastic rod in the barrel from the muzzle end to check that the path of the pellet travel is lying in the centre of the censor rings. adjust and fix the combro. in case of using any box type chronograph like chrony, it is not required. 3.take 2-3 shots one by one and record the result. 4.now take a 1.5 mm LN key and a screw driver, look for a [B]screw in the center of a C ring[/B]( it is a full ring holding a screw the ring has a cut on it when any sideways presure is applied on the ring it locks the screw) when you see from behind. [B]in line with this C clip on the right side of the pistol there is a small hole which is infact the lock for the C ring, its a 1.5 mm LN screw[/B] 5 now the real task---losen the 1.5 mm LN screw 1 1/2 turn by turning anticlockwise. now turn the screw that is in the centre of the C ring in small increments of 2 to 3 minutes in clockwise direction, and tighten the side screw and take few shots, keep repeating the steps until you gete it closer to the 525fps/160mps mark approx. .*** note the [B]cut on the ring should be either on top or bottom, at 12Oclock or 6Oclock position[/B], other wise the side screw will not press the C ring and the screw wont be locked. **** after good use of 2-3 years normally the velocity spring needs change, and if the variation from shot to shot is more than 20 fps there may be other problems like the regulator malfunction, worn out O rings, oor simply the mechanism that hits on the valve pin has become sticky, for this please look for a more qualified person. **** a properly functioning steyr is a [B]superb machine[/B], happy shooting enjoy the sport [B]mahipal s rathore[/B] INDIA Вот как-то так. [/QUOTE]
Вставить цитаты...
Проверка
Ответить
Форумы
Спортивная стрельба
Пистолет
Steyr LP10
Зарегестрируйтесь, что бы не видеть рекламму!
Сверху